Carrying Idler
This is what you can see in the image in front of you. It is called Carrying idler. It is fitted in a fixed frame and is fitted on every one meter, i.e. the carrying idler works at a distance of 3 feet. It supports the upper belt of the conveyorbelt and takes the load of the material on top of it, i.e. it carries the load of the conveyor belt and the material.
Conveyor Roller Frame Bracket and Sizes
We will get conveyor roller waiting frame bracket of all sizes. You can also customize it and we will get all types of conveyor roller & idlers for 450mm to 1500 belts such as alg se carrying roller, impact roller, guide roller, return roller, spiral disc roller, hdpe roller, plastic roller, vertical roller custom design frame bracket & conveyor roller, gravity roller, stainless steel roller 50mm to 139mm diameter.
Self Aligning Carrying Idler
Next your self aligning carrying idler is fitted at a distance of 10 to 15 meters every conveyor belt and its work is to align the conveyor belt and keep the belt in the center so that your material does not fall down and the belt does not get damaged and the life of the conveyor belt also increases due to this it can rotate to some degree means it rotates forward or backward according to the belt while it is going right or left at that time guide idlers are also fitted on it which are fitted in every self aligning carrying idler its work is to not allow the conveyor belt to come out of the frame bracket and to carry the conveyor belt towards the frame Keep it inside the idler so that the conveyor belt does not get damaged and runs smoothly.
Impact Carrying Idler
Next is your impact idler. Impact carrying idler is also a carrying idler, but it is used at the place from where the material is transferred to the conveyor belt, whether from the hopper or the bunker or from another conveyor, the material which is transferred, its impact should not fall on the conveyor belt and the belt should not get damaged. It has an impact rubber ring on it, in coating type, which protects the belt from getting damaged and the conveyor roller, meaning the carrying idler, also protects the bearing of the roller from shock and the roller does not get damaged quickly and its life also increases due to the impact rubber ring.
Return Idler
Next is your return idler, that is, as it is clear from the name, return means the side below which The belt return comes rotating on the lower side and it supports the lower portion. This also supports the conveyor belt at a distance of 2 meters.
Self Aligning Return Idler
Next is your self aligning return idler which is also fitted on the lower return side meaning lower portion. This also has work to do for aligning the conveyor belt to the lower portion.
Spiral Return Idler
Next is your spiral return idler which is also like a return idler and is fitted on the lower portion of the conveyor belt. It has a spiral design and is pushed in the centre from right or left side. It has a spiral design like a screw which helps a lot to keep the conveyor belt in the centre.
Return Idler with Disc
Next is your return idler with disc this return idler disc is also fitted on the lower portion of the conveyor belt and bears the load of the conveyor belt. we wear it and a disc is fitted in between it, the reason for providing the disc is that the return idler should have long life and should not get damaged much and can be cleaned and should not come in much contact.
Garland Idler
Next is your garland idler; garland idler is also a conveyor roller, meaning carrying idler, this too is used to support the upper belt and there is a load on it, to wear it garland idler is such an idler whose shafts are connected to each other, it does not require a frame bracket and it can adjust itself according to the conveyor belt.